Studio views of this model. Each knife is forged to order.
6-Piece Carbon Steel Steak Knife Set
Forged carbon steel, satin finish blade · Pakka wood handle · knife roll included
Made to order. Forged for you, dispatched in about 4 days, delivered 5 to 8 business days after dispatch.
Order today and it should reach you between and .
-
Free shippingon orders of $99 or more, within the United States
-
30-day returnsunused, with the sheath, box and papers
-
Lifetime forge warrantyevery forge weld and handle fit, for the original purchaser
-
Knife roll includedCrownridge char leather knife roll, free with this set
- SteelForged carbon steel, satin finish
- HandlePakka wood
- CarryCrownridge char leather knife roll
What you are holding
This steak knife set is forged carbon steel, not a layered pattern-welded blade, with a plain satin finish from spine to edge. Six matching knives, each on a reddish-brown pakkawood handle finished with a metal bolster and a matching cap at the butt. It is a set built for a table of six, not scaled down or up. A leather knife roll comes with the set, char with straw saddle stitching and a tie strap, with a sewn slot for every knife.
Every knife in this set is forged to order in the same sequence and inspected against the spec standard before it ships.
Built for
- Kitchen
- Steak Knife Set
In the box
- The 6-Piece Carbon Steel Steak Knife Set, sharpened
- One Crownridge char leather knife roll that holds the whole set, a sewn slot for each knife, pale welt, straw-gold saddle stitching and a tie strap; included at no extra cost
Good to know
- Sharpened and inspected before dispatch
- Ships within the United States only
Specified for the set
| Type | Steak Knife Set |
|---|---|
| Steel | Forged carbon steel, satin finish |
| Handle | Pakka wood |
| Edge | Straight edge, hand sharpened |
| Sheath | One Crownridge char leather knife roll that holds the whole set, a sewn slot for each knife, pale welt, straw-gold saddle stitching and a tie strap; included at no extra cost |
| Lead time | About 4 days to dispatch |
| SKU | CRK-STK-K14p-02 |
One steel, forged and ground to a satin
Plain-steel blades are forged from a single steel, named in the specifications, then ground and finished. Every knife is made to the same written standard and inspected against it before it ships.
The steel is heated and forged to the rough shape of the blade, then drawn out to length.
The profile and the bevels are ground by hand, the tang and the spine trued to the drawing.
The blade is hardened and tempered before the handle goes on.
The blade is finished, the handle fitted and shaped, the edge sharpened and inspected.
Carried, not boxed
This set ships with a Crownridge char leather knife roll that holds the whole set, a sewn slot for each knife, pale welt, straw-gold saddle stitching and a tie strap; included at no extra cost. Leather holds moisture, so store the knives out of it between seasons.
Engraving is cut on the blade, at $9.50 a piece. Text or a plain logo, in one colour, the surface's own; nothing is printed. Choose the surfaces above the button and type the text, and you see it drawn where it will be cut before you order. An engraved piece can only be returned if it arrives defective.
Carry
- Leather: store the knives out of it between seasons
Three habits, a lifetime of use
Wipe the blade dry and rub on a little oil. Never the dishwasher. A carbon-steel blade takes a grey patina with use; that is not rust.
Store it dry and out of the sheath for long stretches, because leather holds moisture. A light coat of oil before the off season.
A few strokes on a fine stone at the factory angle keep the edge; a strop between sharpenings. The care guide.
Against the other steak knife sets
 6-Piece Carbon Steel Steak Knife Set |
 5-Piece Carbon Steel Steak Knife Set |
|
|---|---|---|
| Price | $159.00 | $139.00 |
| Steel | Forged carbon steel, satin finish | Forged carbon steel, wavy line pattern finish |
| Overall | Not listed | Not listed |
| Handle | Pakka wood | Pakka wood |
| Sheath | Included | Included |
| Lead time | About 4 days | About 4 days |
| View |
Where you have been
Before you order
The answers you look for most, from the policies and the forge.
Something else? Ask the forge, replies within one business day.
How long until it ships?
A knife with no engraving is dispatched in the business days shown above the button. Add engraving and it is forged and cut for you, which adds about four days. Either way it is delivered 5 to 8 business days after dispatch, within the United States.
Can I return it?
Yes, within 30 days of delivery, unused, with the sheath, box and papers. On a change of mind the $9 return label is deducted from the refund. A defect is replaced free. An engraved piece can only be returned if it arrives defective.
What does the lifetime forge warranty cover?
Every forge weld and every handle fit, for the life of the knife, for the original purchaser. Normal wear, sharpening and damage from misuse are not defects.
How does engraving work?
Choose the surfaces offered above the button, each priced beside it: the blade, the leather sheath, slip or guard, and the handle where it takes a mark. Wooden handles and the knife roll are not engraved. Type the text and you see it drawn where it will be cut. It takes text or a plain logo, cut into the surface in one colour, the surface's own; nothing is printed. A logo goes on the same way: upload it in the same box, PNG, JPG, SVG or PDF, up to 18 MB, cut in one colour like the text. Check the spelling: an engraved piece can only be returned if it arrives defective.
Will the knife look exactly like the photographs?
The photographs are studio views of this model. A Damascus pattern is its own on every blade, and natural handle materials vary in figure and colour. The lengths hold to the spec standard: within 3 mm of the listing.
How do I look after a carbon-steel blade?
Wipe it dry after use and oil it lightly. Keep it out of the dishwasher and out of the sheath for long storage, because leather holds moisture. A grey patina with use is normal and not rust.
