Sheath included
Hollow 8" Damascus Meat Cleaver | Micarta, side profile on white
Hollow 8" Damascus Meat Cleaver | Micarta, three-quarter view with the Crownridge blade guard
Hollow 8" Damascus Meat Cleaver | Micarta, handle and fittings close-up
Hollow 8" Damascus Meat Cleaver | Micarta, Damascus blade close-up
Hollow 8" Damascus Meat Cleaver | Micarta, seated in the Crownridge blade guard
Hollow 8" Damascus Meat Cleaver | Micarta, with the Crownridge blade guard in use

Studio views of this model. Each knife is forged to order, and a Damascus pattern is its own.

Hollow series · Meat Cleaver

Hollow 8" Damascus Meat Cleaver

Damascus blade · Micarta handle · sheath included

$159.00 Free shipping Forged to order
Make it yours

Engraving

$19.00 a surface

Check the spelling: an engraving cannot be returned unless defective.

No surfaces+$0.00

Total$159.00

Secure checkout
  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • JCB
  • Mastercard

Made to order. Forged for you, dispatched in about 4 days, delivered 5 to 8 business days after dispatch.

  • Free shippingon orders of $99 or more, within the United States
  • 30-day returnsunused, with the sheath, box and papers
  • Lifetime forge warrantyevery forge weld and handle fit, for the original purchaser
  • Sheath includedCrownridge char leather blade guard, free with this knife
  • SteelDamascus
  • Overall13 in
  • Blade8 in
  • HandleMicarta
  • CarryCrownridge char leather blade guard
More in the Hollow seriesSee all full tang knives
    Overview

    What you are holding

    This meat cleaver carries the pattern of forge-welded Damascus across a rectangular eight inch blade, with a thumb hole cut near the spine for a second grip on the harder cuts. The handle pairs a black micarta bolster with tan wood scales and white pins, thirteen inches overall with a five inch grip. Straight edge, hand sharpened, built for splitting joints and breaking down a bird rather than fine slicing. Wash it by hand, dry it, and wipe the blade with a drop of oil. The fitted leather blade guard is part of the knife: char leather, a pale proud welt, straw stitching.

    Every Hollow is forged to order in the same sequence and inspected against the spec standard before it ships; the Damascus pattern on yours will be its own.

    Built for

    • Kitchen
    • Meat Cleaver

    In the box

    • The Hollow 8" Damascus Meat Cleaver, sharpened
    • Crownridge char leather blade guard, pale welt, straw-gold saddle stitching; included at no extra cost

    Good to know

    • Sharpened and inspected before dispatch
    • Ships within the United States only
    • Carbon steel: wipe dry and oil after use
    Specifications

    Measured on the knife

    TypeMeat Cleaver
    SteelPattern-welded Damascus (1095 / 15N20)
    Overall length13 in
    Blade length8 in
    Handle length5 in
    TangFull tang
    HandleMicarta
    EdgeStraight edge, hand sharpened
    SheathCrownridge char leather blade guard, pale welt, straw-gold saddle stitching; included at no extra cost
    Lead timeAbout 4 days to dispatch
    SKUCRK-CLV-K09-01
    True to scale, against a 16 in ruler
    Overall 13 inBlade 8 inHandle 5 in

    Lengths hold to within 3 mm of the listing. The spec standard.

    Steel and forge

    Forge-welded, folded, etched

    Damascus blades are forge-welded from 1095 high-carbon steel and 15N20 nickel steel, drawn out and folded, ground, hardened and tempered, then etched so the layers show. Every knife is made to the same written standard and inspected against it before it ships.

    01 Forge weld

    The billet is welded and drawn out at forging heat, then folded and welded again.

    02 Grind

    The profile and the bevels are ground by hand, the tang and the spine trued to the drawing.

    03 Heat treat

    The blade is hardened and tempered before the handle goes on.

    04 Etch and finish

    The blade is etched so the pattern shows, the handle fitted and shaped, the edge sharpened and inspected.

    The written standardOne sequence, every knife
    Sheath and engraving

    Carried, not boxed

    This knife ships with a Crownridge char leather blade guard, pale welt, straw-gold saddle stitching; included at no extra cost. Leather holds moisture, so store the knife out of it between seasons.

    Engraving is cut on any of three surfaces, the blade, the sheath or the handle, at $19.00 a surface. Text or a plain logo, in one colour, the surface's own; nothing is printed. Choose the surfaces above the button and type the text, and you see it drawn where it will be cut before you order. An engraved piece can only be returned if it arrives defective.

    Add an engraving

    Carry

    • Leather: store the knife out of it between seasons
    Care

    Three habits, a lifetime of use

    After use

    Wipe the blade dry and rub on a little oil. Never the dishwasher. A carbon-steel blade takes a grey patina with use; that is not rust.

    Storage

    Store it dry and out of the sheath for long stretches, because leather holds moisture. A light coat of oil before the off season.

    Sharpening

    A few strokes on a fine stone at the factory angle keep the edge; a strop between sharpenings. The care guide.

    Compare

    Against the other meat cleavers

    Hollow 8" Damascus Meat Cleaver Hollow 6.5" Damascus Meat Cleaver
    Price$159.00$119.00
    SteelDamascusDamascus
    Overall13 in10.5 in
    HandleMicartaPakka wood
    SheathIncludedIncluded
    Lead timeAbout 4 daysAbout 4 days
    View
    Recently viewed

    Where you have been

    Hollow 8" Damascus Meat Cleaver
    Questions

    Before you order

    The answers you look for most, from the policies and the forge.

    Something else? Ask the forge, replies within one business day.

    How long until it ships?

    A knife with no engraving is dispatched in the business days shown above the button. Add engraving and it is forged and cut for you, which adds about four days. Either way it is delivered 5 to 8 business days after dispatch, within the United States.

    Can I return it?

    Yes, within 30 days of delivery, unused, with the sheath, box and papers. On a change of mind the $9 return label is deducted from the refund. A defect is replaced free. An engraved piece can only be returned if it arrives defective.

    What does the lifetime forge warranty cover?

    Every forge weld and every handle fit, for the life of the knife, for the original purchaser. Normal wear, sharpening and damage from misuse are not defects.

    How does engraving work?

    Choose the surfaces offered above the button, each priced beside it: the blade, the leather sheath, slip or guard, and the handle where it takes a mark. Wooden handles and the knife roll are not engraved. Type the text and you see it drawn where it will be cut. It takes text or a plain logo, cut into the surface in one colour, the surface's own; nothing is printed. A logo goes on the same way: upload it in the same box, PNG, JPG, SVG or PDF, up to 18 MB, cut in one colour like the text. Check the spelling: an engraved piece can only be returned if it arrives defective.

    Will the knife look exactly like the photographs?

    The photographs are studio views of this model. A Damascus pattern is its own on every blade, and natural handle materials vary in figure and colour. The lengths hold to the spec standard: within 3 mm of the listing.

    How do I look after a carbon-steel blade?

    Wipe it dry after use and oil it lightly. Keep it out of the dishwasher and out of the sheath for long storage, because leather holds moisture. A grey patina with use is normal and not rust.

    Pairs with

    Carried together